基于PLC和PC的织机控制系统设计
摘要:针对织机电气控制系统故障率高、维护量大、工艺难修改等一系列问题,设计出了以PC和PLC为控制中
心、采用远程监控方式的织机的计算机电气控制系统。主要介绍了系统的硬件配置、S7-300PLC的程序结构、WinCC
的组态画面及角度控制原理,实现对织机系统的控制。现场运行证明,系统运行稳定、可靠性高、响应快、操作方便,维
护量小。
关扭词:织机PLC程序结构组态
Design of the Loom Control System Base on PLC and PC
Zhang Chunxiao Yang Yan
Abstract: Aiming at a series of problem such as high failure rate, a great deal of maintenance, difficult to a-
mend a technology resulting form the electric control system of loom, the computer electric control system is de-
signed, in which the PC and PLC are designed as the control center and the remote-communication method is ap-
plied on it. The hardware of system, the S7-300 PLC program architecture and the configuration frame of the
WinCC and the principle of angle control are introduced, the control of loom is realized. The run on site demon-
strate the system has features of stable running, high reliability, fast response, convenient operation and little
maintenance.
Keywords:loom PLC program architecture configuration
1引言
随着国内外先进制造技术的发展,织物的需求
量日益增加,质量要求也越来越高。常见织制工业用
织物包括造纸聚脂网、土工布、工业用尼、地毯底布
和化工等工业用网。本文设计的造纸网织机,用于生
产造纸用网。纸张在我国是一项消耗量巨大的产品,
已经成为人们日常生活中不可缺少的一部分。在生
产过程中,纸浆在造纸网上沉淀脱水而形成纸张雏
形,所以造纸用网的质量将直接影响纸张生产的质
量优劣。造纸网是由金属合金或特殊的聚醋材料制
成的网线按照特定的织造要求编织而成,纸张的质
量直接与网织机的结构、控制方式有关。我国自动化
水平低,生产高质量网的织机都从国外进口,所以研
制织机的计算机控制系统对振兴我国的纺织行业具
有重大意义。
本文是造纸网厂5号织机技术改造项目,在国
内首次将计算机的控制技术应用到织机。5号机存
44
在的问题如下。
1)采用传统的继电器、接触器控制技术,由于织
造过程复杂,低压电器元件较多,并且接线复杂,时
常发生触点故障和元件故障,维修困难。
2)市场要求网纹的花色品种较多,而传统的电
气控制线路难以改变,造成生产工艺不能改变,无法
适应社会需求,生产效率低。
附件: 您所在的用户组无法下载或查看附件
搜索更多相关主题的帖子:
PLC论文